Working on the rig
making funny noises. We have been trying to figure out what is going on with little success. We did discover that the new fittings had worked loose and tightened them several times.
Today we loosened each shroud so that we could lubricate the fittings. Much to our surprise as soon as we loosened the port mid it unwound about three revolutions while making the noise that has been driving me crazy. We let it settle after applying lubricant. When I tightened up the turnbuckle the noise was gone.
I have no clue how the shroud got twisted. It is 19 strand wire. Half of the wires are laid clockwise and the other half counter clockwise. It is a mystery. Given the 20 knot winds in the anchorage we were unable to do a good static tune but we got close.
I am hoping we have solved the problem.
Fair winds and following seas :)